-
OSS FAIRBAIRN SYKES KNIFE -US WWII PANCAKE SPATULA/FLIPPER DAGGER STILETTO -CIA
OSS FAIRBAIRN SYKES KNIFE -US WWII PANCAKE SPATULA/FLIPPER DAGGER STILETTO -CIA
$0
1 vintage U.S. World War II OSS stiletto fighting knife. This historic OSS stiletto would make an important addition to any collection.
The knife measures 11 5/8″ overall. The blade itself measures just under 6 3/4″. The blade has one Rockwell test mark. The original black rubber scabbard o-ring always breaks down over time. Many collectors replace the black rubber o-ring with one from a hardware store. The original o-ring was exactly that–a standard black rubber o-ring, plain and simple.
Mike Silvey’s book Knives of the United States Military World War II features this knife. M.H. Cole’s The Best of U.S. Military Knives also covers this knife. In addition, Frank Trzaska’s article “The O.S.S. Stiletto” published in Knife World Magazine’s Military Knives–a Reference Book discusses this knife as well.
The LF&C pancake flipper scabbard for this knife is in premium condition.
This OSS stiletto has both rare condition, AND it was actually carried—note that unlike most OSS stilettos in this condition with a mint blade (the were never carried) the top of the pancake flipper sheath had a belt woven through it.
-
Robeson USMC Mark 2 Knife -US WWII -WW2 Military -THE BEST EXAMPLE AVAILABLE!
Robeson USMC Mark 2 Knife -US WWII -WW2 Military -THE BEST EXAMPLE AVAILABLE!
$0
The best Robeson USMC you will ever see. This near-mint Robeson USMC knife would make a rare addition to any collection.
The has its correct black stitching sheath, with the correct zigzag pattern snap. The knife has its correct welded pommel (note the minor voids visible after Robeson cutlers smoothed the pommel end after welding), and perfect blued blade.
-
CASE WWII Fighting Knife -Hollow Handle Military Survival -WW2 USN Collection
CASE WWII Fighting Knife -Hollow Handle Military Survival -WW2 USN Collection
$0
1 hard to find U.S. World War II CASE survival fighting knife available. This is the 5″ CASE hollow handle fighting knife. This knife would make an important addition to any collection.
The World War 2 Case hollow handle survival knife has a screw-off pommel that allows access to dry storage inside the handle. The pommel cap also has a compass. The WW2 Case survival knife measures 9 7/16″ overall with a 5″ blade. The sheath is marked ‘U.S.N.’.
-
WWII Medical Corpsman Knife -US WW2 Navy Combat Medic -Military Collection -USN
WWII Medical Corpsman Knife -US WW2 Navy Combat Medic -Military Collection -USN
$0
1 possibly one of a kind U.S. World War 2 Medical Corpsman fighting knife available. This U.S. fighting knife would make an important addition to any collection.
This super unique Corpsman knife has a 7 5/16″ blade. The handle is cast aluminum.
The front side of the handle has the caduceus insignia of the U.S. Medical Corps. This side of the handle also has the National Coat of Arms of the United States–the U.S. eagle grasping arrows in one talon, and an olive branch in the other.
The reverse side of the handle has the Medical Corps insignia as well, and the ‘U.S.N.’ anchor.
The knife is paired with a sheath marked ‘KENNEDY BROS. ARMS CO. ST. PAUL’.
-
Japanese WWII Army Sword -IJA Katana -Kaneyoshi HIGH CONDITION -Samurai/Military
Japanese WWII Army Sword -IJA Katana -Kaneyoshi HIGH CONDITION -Samurai/Military
$0
St. Croix Blades buys Japanese swords! In need of an appraisal, or want to sell or consign your sword or entire collection? Pricing out an estate? Contact Us! 715-557-1688 via phone, or email us at info@stcroixblades.com.
1 antique World War II Japanese samurai Army Officer’s sword available. The blade is a high condition sword by Okada Kaneyoshi. This fine Japanese Army katana would make an important addition to any collection.
The showato blade measures 26 1/4″ (66.6 cm)–as measured properly with a tape pulled tight from the blade tip to the bottom of the notch in the habaki. There is a Seki stamp above the signature. All fittings have the matching assembly number ‘3’.
Kaneyoshi is featured in John Slough’s book An Oshigata Book of Modern Japanese Swordsmiths 1868-1945 on page 74. See photo above.
-
US VIETNAM WAR Woodsmans Pal AIRMANS Fighting Machete Knife -1963 Manual & Stone
US VIETNAM WAR Woodsmans Pal AIRMANS Fighting Machete Knife -1963 Manual & Stone
$0
River Valley Knives buys knife collections, Japanese samurai sword collections, and individual knives and swords. Call us at 715-557-1688.
1 Vietnam War U.S. Airman’s Survival Tool Kit available. This Airman’s fighting knife/machete is also known as The Woodsman’s Pal. This fighting machete comes with its original manual and with its original sharpening stone and with its original fire-starting lens. This Airman’s Survival Tool Kit set would make an important addition to any Vietnam or militaria collection.
The blade is stamped ‘FRANK & WARREN, INC. SURVIVAL AX TYPE IV MIL-S-8642C‘. The original book included with this Airman’s Survival machete is:
Description, CARE and USE of SURVIVAL TOOL KITS, AIRMAN’S — 24 pg. book
The manual was printed in September of 1963.
The kit also includes:
‘Burning Lens’ fire starter
sharpening stone
wrist lanyard cordThe blade edge is covered in a black rubber coating to prevent rust.
-
US WW1 1910 Springfield Bolo/Trench Knife CANVAS SCABBARD COVER -1917 Machete
US WW1 1910 Springfield Bolo/Trench Knife CANVAS SCABBARD COVER -1917 Machete
$0
1 vintage original canvas scabbard cover for the World War I Springfield Armory model 1910 bolo machete fighting knife, the 1917 Plumb Bolo, and the 1917 A.C.C.O. Bolo available.
The leather and canvas scabbard cover is stamped on the back ‘BRAUER BROS. 1918‘.
There is a small stencil on the back of the cover; it reads ‘L. McK‘.
This cover can be used to replace a canvas sheath cover that is in poor condition, or which is missing from the scabbard altogether.
-
Antique Iron Japanese Samurai Katana Sword TSUBA -Guard/Old Collection
Antique Iron Japanese Samurai Katana Sword TSUBA -Guard/Old Collection
$175
1 antique Japanese tsuba for a Japanese katana available. This fine iron tsuba would make an important addition to any collection, and will also look incredible mounted.
This iron tsuba measures 3 3/32″ inches (78 mm) by 3 5/32″ (80 mm). This tsuba is 5/32″ thick (4 mm). The blade opening of this tsuba measures 1 1/16″ (27 mm) by 3/8″ (9.5 mm).
A grassy motif done in gold gilt is visible.
